Publications
1. A. Juhász, M. Dimitrova-Lukács, G. Vörös, J.
Gubicza, P. Tasnádi, P. Lukács and A. Kele: Continuous
indentation on glasses and ceramics, Fortchrittsberichte der Deutschen
Keramischen Gesellschaft,
9
(1994) 87-97.
2. J. Gubicza:
Characterization of glasses and ceramics by continuous indentation
tests, Key Engineering Materials, 103
(1995) 217-220.
3. J. Gubicza, A. Juhász, P. Arató, G. Vörös,
M. Dimitrova-Lukács and P. Tasnádi: A new mechanical test
for
the complex characterization of the mechanical properties of solids,
Proceedings of the 4th European Conference on Advanced Materials and
Processes, Vol.
2. (1995) pp.
507-510.
4. Margarita Dimitrova-Lukács, I. Sajo, P. Lukács, A.
Juhász, J. Gubicza, P. Arató, L. Lendvay:
Glass-bioceramics with enhanced mechanical properties, Fourth
EuroCeramics, edited by A. Ravaglioli, Vol.
8. (1995) pp.133-140.
5. J. Gubicza, A. Juhász, P.
Tasnádi, P. Arató and G. Vörös: Determination
of the
hardness and elastic modulus from continuous Vickers indentation test,
J.
Mater. Sci. 31 (1996)
3109-3114.
6. J. Gubicza, A. Juhász
and J. Lendvai: A new method for hardness determination from depth
sensing
indentation tests, J. Mater. Res. 11
(1996) 2964-2967.
7. J. Gubicza, A. Juhász, P.
Arató, P. Szommer, P. Tasnádi and G. Vörös:
Elastic modulus determination from depth sensing indentation testing,
J. Mater.
Sci. Letters 15 (1996)
2141-2144.
8. J. Gubicza:
Determination of Young’s modulus from Depth Sensing
Vickers Indentation Tests, Solid State Phenomena 56 (1997) 195-200.
9. J. Gubicza, N. Rozlosnik and
A. Juhász: Comment on “Indentation size effect: reality or
artefact?”, J. Mater. Sci. Letters 16
(1997) 1904-1905.
10. Gubicza J. és
Juhász A.: Mechanikai tulajdonságok
meghatározása a
mélységérzékeny
Vickers-keménységmérés
módszerével, Kohászat, Bányászati
és Kohászati Lapok, 130
(1997) 315-318.
11. J. Gubicza, P.
Arató, F. Wéber and A. Juhász: Elastic modulus of
oxidation-formed silicon nitride composite, J. Mater. Sci. Letters, 17 (1998) 615-618.
12. J. Gubicza, P. Arató and
F. Wéber: Oxidation-induced changes in mechanical properties of
silicon nitride ceramics, Proceedings of 9th CIMTEC (World Ceramic
Congress and Forum on New Materials), Florence, Italy, June 14-19, 1998
(Techna, Faenza, 1999) p.743-751.
13. J. Gubicza, P. Arató, F.
Wéber and A. Juhász: Mechanical properties of oxidized
silicon nitride
ceramics, Materials Science and Engineering A259 (1999) 65-72.
14. J. Gubicza and F. Wéber:
Comparison of oxidation behaviour of sintered ceramics produced from
various silicon nitride powders, Materials Science and Engineering A263 (1999) 101-104.
15. J. Gubicza, J.
Szépvölgyi, I. Mohai, L. Zsoldos and T. Ungár:
Particle size distribution and the dislocation density determined by
high resolution X-ray diffraction
in nanocrystalline silicon nitride powders, Materials Science and
Engineering A280 (2000) 263-269.
16. T. Kemény, D.
Kaptás, L. F. Kiss, J. Balogh, L. Bujdosó, J. Gubicza, T.
Ungár and I. Vincze: Structure and magnetic properties of
nanocrystalline (Fe1-xCox)90Zr7B2Cu1 (0x0.6), Applied Physics
Letters, 76 (2000) 2110-2112.
17. J. Gubicza, J.
Szépvölgyi, I. Mohai, G. Ribárik and T.
Ungár: The effect of heat-treatment on the grain-size of
nanodisperse plasmathermal silicon nitride powder,
J. Mater. Sci., 35 (2000)
3711-3717.
18. T. Ungár, J. Gubicza, P.
Hanák and I. Alexandrov: Densities and character of dislocations
and
size-distribution of subgrains in deformed metals by X-rays diffraction
profile
analysis, Materials Science and Engineering A319-321 (2001) 274-278.
19. J. Gubicza, J.
Szépvölgyi, I. Mohai and T. Ungár: X-ray line
profile analysis on nanodisperse silicon nitride ceramics, Materials
Science Forum, 378-381 (2001)
729-734.
20. Z. Somogyvári, E.
Sváb, Gy. Mészáros, K. Krezhov, P. Konstantinov,
T. Ungár and J. Gubicza: Magnetic cation distribution in
nanocrystalline Fe3O4 spinel, Materials Science Forum, 378-381 (2001) 771-776.
21. J. Gubicza, G. Ribárik, G. R.
Goren-Muginstein, A. R. Rosen and T. Ungár: The density and the
character of dislocations in cubic and hexagonal polycrystals
determined by X-ray diffraction,
Materials Science and Engineering A309-310
(2001) 60-63.
22. I. Mohai, J.
Szépvölgyi, I. Bertóti, M. Mohai, J. Gubicza and T.
Ungár: Thermal plasma synthesis of zinc ferrite nanopowders,
Solid State Ionics, 141-142
(2001) 163-168.
23. J. Szépvölgyi, I.
Mohai and J. Gubicza: Atmospheric ageing of nanosized silicon nitride
powders, J. Mater. Chem. 11
(2001) 859-863.
24. T. Ungár, J. Gubicza, G.
Ribárik and A. Borbély: Crystallite size-distribution and
dislocation structure detremined by diffraction profile analysis:
principles and practical application to cubic and hexagonal crystals,
J. Appl. Cryst. 34 (2001) 298-310.
25. T. Ungár, J. Gubicza, G. Ribárik and T. W. Zerda:
X-ray diffraction study of crystallite size-distribution and strain in
carbon
blacks, Proc. of MRS Fall Meeting, 2000, Boston, USA, Vol.661 (2001) KK9.2.1-KK9.2.6.
26. T. Ungár, J. Gubicza, G.
Ribárik, P. Hanák: Dislocation structure and crystallite
size distribution in plastically deformed metals determined by
diffraction peak profile analysis, J. Engng. Mater. and Techn. 124 (2001) 2-6.
27. J. Gubicza, G. Ribárik,
I. Bakonyi and T. Ungár: Crystallite-size distribution and
dislocation structure in nanocrystalline HfNi5 determined by X-ray
diffraction profile analysis, J. Nanosci. and Nanotechn. 1 (2001) 343-348.
28. G. Ribárik, T.
Ungár and J. Gubicza: MWP-fit: a program for Multiple Whole
Profile fitting of diffraction profiles by ab-initio theoretical
functions, J. Appl. Cryst. 34
(2001) 669-676.
29. J. Gubicza, G.
Ribárik, I. Bakonyi and T. Ungár: Microstructure of a
rapidly quenched nanocrystalline Hf11Ni89 alloy from X-ray diffraction,
Proc. of EUROMAT 2001 Conference, 10-14 June, 2001, Rimini, Italy, on
CD-ROM (2001).
30. T. Ungár, J. Gubicza, G.
Ribárik, C. Pantea and T. W. Zerda: Microstructure of carbon
blacks
determined by X-ray diffraction profile analysis, Carbon, 40 (2001) 929-937.
31. J. Gubicza, G. Ribárik, J. Szépvölgyi, I.
Mohai and T. Ungár: Crystallite size distribution and
dislocation
density in nanocrystalline silicon nitride powders produced by two
different
procedures, Materials World, Vol.2.,
No.2. (2001)
http://www.freeweb.hu/materialworld//tartalom/2001/apr/gubicza_ribarki_szepvolgyi_mohai_ungar.htm
32. I. Mohai, J.
Szépvölgyi and J. Gubicza: Synthesis of zinc ferrite
nanopowders in an RF thermal plasma, Proceedings of 15th International
Symposium on Plasma Chemistry, 9-13 July, 2001, Orleans, France,
Vol.VII., (2001) 2891-2896.
33. D. Kaptás, L.
F. Kiss, J. Balogh, J. Gubicza, T.
Kemény and I. Vincze: Superparamagnetic relaxation in
nanocrystalline Fe80Zr7B12Cu1 alloys, Hyperfine Interactions, 141/142 (2002) 175-179.
34. T. Ungár and J. Gubicza:
Grain size, size-distribution and dislocation structure from
diffraction peak profile analysis, Proc. of Second International
Symposium on Ultrafine Grained Materials, The 2002 TMS Annual Meeting,
17-21 February, 2002, Seattle, WA, US. eds.: Y.T. Zhu, T. G. Langdon,
R. S. Mishra, S. L. Semiatin, M. J. Saran and T. C. Lowe, (2002)
595-604.
35. T. Ungár and J.
Gubicza: Dislocation structure and crystallite size-distribution in
hexagonal nanomaterials from X-ray peak profile analysis, Zeitschrift
fur Metallkunde 93 (2002)
694-698.
36. C. Pantea, J. Gubicza, T.
Ungár, G. Voronin and T. W. Zerda: Dislocation density and
graphitization of diamond crystals, Phys. Rev. B 66 (9): art. no. 094106 (2002).
37. J.
Gubicza, M. Kassem, T. Ungár: Formation
of nanocrystalline aluminum magnesium alloys by
mechanical alloying, Proceedings of the 3rd
International
Powder Metallurgy Conference (2002) pp. 741-755.
38. J. Gubicza, I. C. Dragomir, G.
Ribárik, Y. T. Zhu, R. Z. Valiev and T. Ungár:
Microstructure of severely deformed titanium from X-ray diffraction
profile analysis, Materials Science Forum, 414-415 (2003) 229-234.
39. D. Fátay, E.
Bastarash, K. Nyilas, S. Dobatkin, J. Gubicza and T. Ungár:
X-ray diffraction study on the microstructure of
Al-5.9%Mg-0.3%Sc-0.18%Zr alloy deformed by high pressure torsion,
Zeitschrift fur Metallkunde 94
(2003) 842-847.
40. A. P. Zhilyaev, J. Gubicza,
S. Suriñach, M. D. Baró and T. G. Langdon: Calorimetric
and X-ray measurements in ultrafine-grained nickel, Materials Science
Forum 426
(2003) 4507-4512.
41. Y.T. Zhu, J.Y. Huang, J. Gubicza,
T. Ungár, Y.M. Wang, E. Ma, R.Z. Valiev: Nanostructures in Ti
Processed by Severe Plastic Deformation, J. Mater. Res. 18 (2003) 1908-1917.
42. J. Gubicza, I. C. Dragomir,
G. Ribárik, S. C. Baik, Y. T. Zhu, R. Z. Valiev and T.
Ungár: Dislocation structure and crystallite size-distribution
in plastically deformed Ti determined by X-ray peak profile analysis,
Zeitschrift fur Metallkunde 94
(2003) 1185-1188.
43. A. P. Zhilyaev,
J.Gubicza, G. Nurislamova, Á.Révész, S.
Suriñach, M. D. Baró, T. Ungár:
Microstructural Characterization of Ultrafine-Grained Nickel, Phys.
Stat. Sol. (a) 198 (2003)
263-271.
44. T. Kemény, L. F.
Kiss, D. Kaptás, J. Balogh, L. Bujdosó, J. Gubicza and I.
Vincze: Superparamagnetic behaviour in different nanocrystalline
fraction Fe80B12Zr7Cu alloys, Mater. Sci. Eng. A 375-377 (2004) 219-222.
45. J. Gubicza, D. Fátay, K.
Nyilas, E. Bastarash, S. Dobatkin and T. Ungár: X-ray Peak
Profile Analysis on the Microstructure of Al-5.9%Mg-0.3%Sc-0.18%Zr
Alloy Deformed by High Pressure Torsion Straining, Proc. 2nd
International Conference on Nanomaterials by Severe Plastic
Deformation: Fundamentals – Processing –
Applications, Wien, Austria (Dec. 9-13, 2002), ed. M.J.Zehetbauer &
R.Z.Valiev,
J.Wiley VCH Weinheim (Germany), p. 420-425 (2004).
46. J. Gubicza, M. Kassem and T.
Ungár: The microstructure of mechanically alloyed
nanocrystalline aluminium-magnesium, Materials Science Forum 443-444 (2004) 103-107.
47. N. Q. Chinh, J.
Gubicza, Zs. Kovács and J. Lendvai: Depth Sensing Indentation
Tests in Studying Plastic Instabilities, J. Mater. Res. 19 (2004) 31-45.
48. L. F. Kiss, D. Kaptás, J.
Balogh, J. Gubicza, T. Kemény and I. Vincze: Study of the
unusual increase in the Curie temperature of the residual amorphous
phase in nanocrystalline Fe90Zr7B2Cu1, J. Magnetism and Magnetic
Materials 272-276 (2004)
1410-1412.
49. J. Gubicza, M. Kassem, G.
Ribárik and T. Ungár: The evolution of the microstructure
in mechanically alloyed Al-Mg studied by X-ray diffraction, Mat. Sci.
Eng. A 372 (2004) 115-122.
50. L. F. Kiss, D.
Kaptás, J. Balogh, L. Bujdosó, T. Kemény, J.
Gubicza and I. Vincze: Rigid magnetic foam-like behavior in ball-milled FeAl, Phys.
Rev. B 70 (2004) 012408.
51. J. Szépvölgyi, I.
Mohai, J. Gubicza and I. Sáray: RF Thermal Plasma Synthesis of
Ferrite Nanopowders from Metallurgical Wastes, Key Engineering
Materials, 264-268 (2004)
2359-2362.
52. J.
Szépvölgyi, I. Mohai and J. Gubicza: Studies on atmospheric
ageing of nanosized silicon nitride powders, Key Engineering Materials,
264-268 (2004) 2311-2314.
53. J. Gubicza, N. H. Nam, L. Balogh,
R. J. Hellmig, V. V. Stolyarov, Y. Estrin and T. Ungár:
Microstructure of severely deformed metals determined by X-ray peak
profile analysis, J. Alloys and Compounds 378 (2004) 248-252.
54. G. Ribárik, J.
Gubicza, T. Ungár: Correlation between strength and
microstructure of ball milled Al-Mg alloys determined by X-ray
diffraction, Mater. Sci. Eng. A 387-389
(2004) 343-347.
55. D. Fátay, J. Gubicza,
P. Szommer, J. Lendvai, M. Blétry, P. Guyot: Thermal stability
and mechanical properties of a Zr-based bulk amorphous alloy, Mater.
Sci. Eng. A 387-389 (2004)
1001-1004.
56. J. Gubicza, N. Q. Chinh, Z.
Horita and T. G. Langdon: Effect of Mg addition on microstructure and
mechanical properties of aluminum, Mater. Sci. Eng. A 387-389 (2004) 55-59.
57. M. Shapaan, J. Gubicza, J.
Lendvai and L.K. Varga: Crystallization behavior of
(Fe100-xCox)62Nb8B30
bulk amorphous alloy, Mater. Sci. Eng. A 375-377 (2004) 785-788.
58. C. Pantea, J. Gubicza,
T. Ungár, G.A. Voronin, N.H. Nam, T.W. Zerda: High pressure
effect
on dislocation density in nano-size diamond crystals, Diamond and
Related
Materials 13 (2004) 1753-1756.
59. J. Gubicza, Gy.
Krállics, I. Schiller and D. Malgin: Evolution of the
Microstructure of Al 6082 Alloy during Equal-Channel Angular Pressing,
Materials Science Forum 473-474
(2004) 453-458.
60. G.A. Voronin, T.W.
Zerda, J. Gubicza, T. Ungár, S. N. Dub: Properties of
nanostructured
diamond – silicon carbide composites sintered by high-pressure
infiltration
technique, J. Mater. Res. 19
(2004) 2703-2707.
61.
L. F. Kiss, D. Kaptás, J. Balogh, L. Bujdosó, J. Gubicza,
T. Kemény, I. Vincze:
Magnetic
properties of ball-milled FeAl nanograins, phys. stat.
sol. (a)
201 (2004) 3333-3337.
62. T. Ungár, J.
Gubicza, G. Tichy, C. Pantea and T.W. Zerda: Size and shape of
crystallites and internal stresses in carbon blacks, Composites
Part A: Applied Science and manufacturing 36
(2005) 431-436.
63. K. Máthis, J. Gubicza, N. H.
Nam: Microstructure and mechanical behavior of AZ91 Mg-alloy processed
by Equal Channel Angular Pressing, J. Alloys and Comp. 394
(2005) 194-199.
64. B.
Palosz, E.Grzanka, C. Pantea, T. W. Zerda, J. Gubicza, T. Ungár:
Microstructure
of nanocrystalline diamond powders studied by powder diffractometry, J.
Appl.
Phys. 97 (2005)
064316.
65.
B. Baretzky, M. D.
Baró, G. P. Grabovetskaya, J. Gubicza, M. B. Ivanov,
Yu. R. Kolobov, T. G. Langdon, J. Lendvai, A. G. Lipnitskii,A. A.
Mazilkin, A.
A. Nazarov, J. Nogués, I. A. Ovidko, S. G. Protasova, G. I.
Raab, Á. Révész, J.
Sort, M. J. Starink, B. B. Straumal, S. Suriñach, T.
Ungár, A. P. Zhilyaev:
Fundamentals of interface phenomena in advanced bulk nanoscale
materials, Rev.
Adv. Mater. Sci. 9 (2005)
45-108.
66.
J.
Gubicza, L. Balogh, R. J. Hellmig, Y. Estrin and T. Ungár:
Dislocation
structure and crystallite size in severely deformed copper by X-ray
peak
profile analysis, Mater. Sci. Eng. A 400–401 (2005)
334–338.
67. T. Ungár, G. Tichy, J. Gubicza, R. J. Hellmig:
Correlation
between subgrains and coherently-scattering-domains, Powder Diffraction
20 (2005) 366-375.
68.
J. Gubicza, N. Q. Chinh, Gy. Krállics, I. Schiller, T.
Ungár:
Microstructure of ultrafine-grained fcc metals produced by severe
plastic
deformation, Curr. Appl. Phys. 6
(2006) 194-199.
69. J.
Gubicza, N. H. Nam, K. Máthis and V. V. Stolyarov:
Microstructure of severely
deformed metals from X-ray line profile analysis, Z. Kristallographie,
Suppl. 23 (2006) 93-98.
70. L.
Balogh, J. Gubicza, R. J. Hellmig, Y. Estrin and T. Ungár:
Thermal stability of
the microstructure of severely deformed copper, Z. Kristallographie,
Suppl. 23 (2006) 381-386.
71. L.
Gál, I. Mohai, Z. Károly, J. Szépvölgyi, J.
Gubicza: Synthesis of nanosized
zinc-ferrites in RF thermal plasma reactor, Porc. 17th International
Symposium
on Plasma Chemistry (ISPC-17), August 7-12, 2005, Toronto, Canada, on
CDROM.
72. J.
Gubicza, N. Q. Chinh, T. G. Langdon, T. Ungár: Microstructure
and
strength of metals processed by severe plastic deformation, Ultrafine
Grained
Materials IV. Edited by Y.T. Zhu, T.G. Langdon, Z. Horita, M.J.
Zehetbauer,
S.L. Semiatin, and T.C. Lowe. TMS (The Minerals, Metals & Materials
Society), 2006, pp. 231-236.
73. J.
Gubicza, T. Ungár, Y. Wang, G. Voronin, C. Pantea, T. W. Zerda:
Microstructure of diamond-SiC nanocomposites determined by X-ray line
profile
analysis, Diam. Relat. Mater. 15
(2006) 1452-1456.
74. I.
Schiller, J. Gubicza, Zs. Kovács,
N. Q. Chinh, J. Illy: Precipitation and mechanical
properties of supersaturated
Al-Zn-Mg alloys processed by severe plastic deformation, Mater. Sci.
Forum, 519-521 (2006) 835-840.
75. J.
Gubicza, I. Schiller, N. Q. Chinh, J. Illy:
Precipitation
microstructure of ultrafine-grained Al-Zn-Mg alloys processed by severe
plastic
deformation, Mater. Sci. Forum, 537-538
(2007) 169-176.
76.
I.
Mohai, L. Gál, J. Szépvölgyi, J. Gubicza, Z. Farkas:
Synthesis of
Nanosized Zinc Ferrites from Liquid Precursors in RF Thermal Plasma
Reactor, J.
Eur. Ceram. Soc.27 (2007)
941-945.
77. Gy.
Horváth, N. Q.
Chinh, J. Gubicza, J. Lendvai: Plastic instabilities and dislocation
densities
during plastic deformation in Al-Mg alloys, Mater. Sci Eng. A 445-446 (2007) 186-192.
78. N. Q. Chinh, J. Gubicza,
T. G. Langdon: Face-centered cubic metals and alloys processed by
Equal-Channel
Angular Pressing, J. Mater. Sci. 42
(2007) 1594-1605.
79.
T.
Ungár, J. Gubicza: Nanocrystalline Materials Studied by Powder
Diffraction Line Profile Analysis, Z. Kristallographie 222 (2007) 114-128.
80. D.
Fátay, J. Gubicza, J. Lendvai: Indentation creep behavior of a
Zr-based bulk metallic glass, J. Alloys Compd. 434-435 (2007) 75-78.
81. J.
Gubicza, N. Q. Chinh, P. Szommer, A. Vinogradov,
T. G. Langdon: Microstructural Characteristics of Pure Gold Processed
by
Equal-Channel Angular Pressing, Scripta Mater. 56 (2007)
947-950.
83. J.
Gubicza, S. Nauyoks,
L. Balogh, J. Lábár, T. W. Zerda, T. Ungár:
Influence of sintering
temperature and
pressure on crystallite size and lattice defect structure in
nanocrystalline SiC, J. Mater. Res. 22 (2007)
1314-1321.
84.
J.
Gubicza, N. Q. Chinh, T. Csanádi, T. G. Langdon, T.
Ungár: Microstructure
and strength of severely deformed f.c.c. metals, Mater. Sci. Eng. A
462 (2007) 86–90.
85. J. Gubicza,
I. Schiller,
N. Q. Chinh, J. Illy, Z. Horita and T. G. Langdon: The effect of severe
plastic
deformation on precipitation in supersaturated Al-Zn-Mg alloys, Mater.
Sci.
Eng. A 460–461 (2007) 77–85.
86.
J.
Szépvölgyi, I. Mohai,
L. Gál, I. Mészáros, J. Gubicza: Synthesis of
nickel-zinc ferrites in RF
thermal plasma reactor, Proc.of 10th International Conference and
Exhibition of
the European Ceramic Society, June 17 - 21, 2007, Berlin, Germany.
87. L. Gál, I. Mohai, I. Mészáros, J. Gubicza, J.
Szépvölgyi: Synthesis of Zinc Ferrites in RF Thermal Plasma Reactor Proc.
of 10th International Conference and Exhibition of the European Ceramic
Society, June 17 - 21, 2007, Berlin, Germany.
88. J. Szépvölgyi, L. Gál, I. Mohai, I. Mészáros, J.
Gubicza: Synthesis of Spinel Ferrites in Radiofrequency Thermal Plasma
Reactor, Proc. of the 18th International Symposium on Plasma
Chemistry, August 26 - 31, 2007, Kyoto, Japan, ISBN978-4-9903773-3-5,
Paper ID-224 (2007).
89. K. A. Főglein, J. Gubicza, I. Z. Babievskaya J. Szépvölgyi:
Theoretical and experimental aspects of carbon formation in thermal
plasma, Proc. of the 18th International Symposium on Plasma
Chemistry, August 26 - 31, 2007, Kyoto, Japan, ISBN978-4-9903773-3-5,
Paper ID-250 (2007).
90.
J. Gubicza, T.
Ungár: Characterization of defect structures in nanocrystalline
materials by X-ray line profile analysis, Z. Kristallographie 222
(2007) 567-579.
(<
http://www.zkristallogr.de>
http://www.zkristallogr.de)
91. J.
Gubicza, S. Dobatkin,
Z. Bakai, N. Q. Chinh, T. G. Langdon: Microstructure and mechanical
behavior of
severely deformed f.c.c. metals, Mater. Sci. Forum 567-568 (2007) 181-184.
92. J.
Gubicza, J.L. Lábár,
E. Agócs, D. Fátay, J. Lendvai: Effect of
nano-quasicrystals on viscosity of a
Zr-based bulk metallic glass, Scripta
Mater. 58 (2008) 291-294.
(J.
Gubicza, J.L. Lábár,
E. Agócs, D. Fátay, J. Lendvai: Corrigendum
to ‘‘Effect of nano-quasicrystals on viscosity of a
Zr-based bulk metallic glass” [Scripta Mater. 58 (2008)
291–294], Scripta Materialia 58 (2008) 1038.)
93. J. Gubicza, N. Q. Chinh, J. L.
Lábár, Z. Hegedűs, C. Xu, T. G. Langdon: Microstructure
and yield strength of severely deformed silver, Scripta Mater. 58 (2008) 775–778.
94. J. Lendvai, D.
Fátay, J. Gubicza: Indentation creep study on a Zr-based bulk
metallic glass containing nano-quasicrystals, Mater. Sci. Eng. A 483–484 (2008) 607–610.
95. S. G. Chowdhury, A.
Mondal, J. Gubicza, Gy. Krállics, Á. Fodor: Evolution of Microstructure and
Texture in an Ultrafine-grained Al6082 Alloy during Severe Plastic Deformation,
Mater. Sci. Eng. A 490 (2008) 335–342.
96. J. Gubicza, H.-Q. Bui,
F. Fellah, N. Szász, G. Dirras: Bulk ultrafine-grained Nickel consolidated from
nanopowders, Mater. Sci. Forum 589 (2008) 93-98.
97. J. Gubicza, Zs. Fogarassy, Gy. Krállics, J. Lábár,
T. Törköly: Microstructure and mechanical behavior of ultrafine-grained
titanium, Mater. Sci. Forum 589 (2008) 99-104.
98. Gy. Krállics, A. Fodor, J. Gubicza, Zs. Fogarassy:
Mechanical and microstructural characterisation of Al6082 ultra-fine grained
alloy manufactured by ECAP combined with traditional forming processes, Mater.
Sci. Forum 589 (2008) 111-116.
99. N. Q. Chinh, J. Gubicza, T. Czeppe, J. Lendvai, Z.
Hegedűs, C. Xu, T. G. Langdon: Effect of Pre-Aging on the Microstructure and
Strength of Supersaturated AlZnMg Alloys Processed by ECAP, Mater. Sci. Forum 584-586 (2008) 501-506.
100. Q. H. Bui, G. F. Dirras, A. Hocini, S. Ramtani, A.
Abdul-latif, J. Gubicza, T. Chauveau, Z. Fogarassy: Microstructure and
mechanical properties of commercial purity HIPed and Crushed Aluminum, Mater. Sci. Forum 584-586 (2008) 579-584.
101. I. Dézsi, Cs. Fetzer, A. Gombkötő, I. Szűcs, J. Gubicza and T. Ungár: Phase transition in
nanomagnetite, J. Appl. Phys. 103 (2008) 104312.
102. J. Gubicza, N. Q. Chinh, J. L. Lábár, Z. Hegedűs,
P. Szommer, G. Tichy, T. G. Langdon: Delayed microstructural recovery in silver
processed by equal channel angular pressing, J. Mater. Sci. 43 (2008) 5672–5676.
(<http://www.springerlink.com/content/w14071866w12149p/> )
103. G. F. Dirras, J. Gubicza
and H. Q. Bui: Ultrafine-grained materials processed from nanopowders:
Microstructures and mechanical properties, Proceedings of 18th DYMAT
Technical Meeting, September 10-12, 2008, Bourges, France (2008) p.25-32 (ISBN:
2-9517947-3-8).
104. J. Gubicza, H.-Q. Bui,
F. Fellah, G. Dirras: Microstructure and mechanical behavior of
ultrafine-grained Ni processed by different powder metallurgy methods, J.
Mater. Res. 24 (2009) 217-226.
105.
T.
Ungár, E. Schafler, J. Gubicza: Microstructure of Bulk
Nanomaterials Determined by X-Ray Line Profile Analysis, in the book
entitled BULK NANOSTRUCTURED MATERIALS, (WILEY–VCH), eds.: M.J.
Zehetbauer and Y.T. Zhu (2009) ISBN: 978-3-527-31524-6.
106. J. Lendvai, J. Gubicza, J. L. Lábár, Z. Kuli: Effect
of crystallization on the deformation behavior of a Zr-based bulk metallic
glass, Int. J. Mater. Res. 100 (2009) 439-442.
107. J. Gubicza, N. Q. Chinh, J. L. Lábár, Z. Hegedűs,
T. G. Langdon: Twinning and dislocation activity in silver processed by severe
plastic deformation, J. Mater. Sci. 44 (2009) 1656–1660.
(http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s10853-009-3278-1.)
108. J. Gubicza, N. Q. Chinh, J. L. Lábár, G. Tichy, Z.
Hegedűs, C. Xu, T. G. Langdon: Stability of microstructure in silver processed
by severe plastic deformation, Int. J. Mater. Res. 100 (2009) 884-887.
109. N. Q. Chinh, J. Gubicza, T. Czeppe, J. Lendvai, C.
Xu, R. Z. Valiev and T. G. Langdon: Developing a strategy for the processing of
age-hardenable alloys by ECAP at room temperature, Mater. Sci. Eng. A 516
(2009) 248–252.
110. J. Gubicza, N. Q. Chinh,
J.L. Lábár, S. Dobatkin, Z. Hegedűs, T. G. Langdon: Correlation between
microstructure and mechanical properties of severely deformed metals, J. Alloys
Compd. 483 (2009) 271-274.
111. G. Dirras, S. Bouvier, J. Gubicza, B. Hasni and T.
Szilágyi: Mechanical characteristics under large amplitude monotonic and cyclic
simple shear of spark plasma sintered ultrafine-grained nickel, Mater. Sci.
Eng. A 526 (2009) 201–210.
112. J. Gubicza, N. Q. Chinh, J. L. Lábár, Z. Hegedűs, T.
G. Langdon: Principles of self-annealing in silver processed by equal-channel
angular pressing: The significance of a very low stacking fault energy, Mater.
Sci. Eng. A. 527 (2010) 752-760.
113. N. Q. Chinh, J.
Gubicza, T. Czeppe, J. Lendvai and T. G. Langdon: Processing
Age-hardenable Alloys by Equal-Channel Angular Pressing at Room
Temperature: Strategies and Advantages, Mater. Sci. Forum 633-634 (2010) 527-534.
114. F. Fellah, G. Dirras, J. Gubicza, F. Schoenstein,
N. Jouini, S.M. Cherif, C. Gatel, J. Douin: Microstructure and mechanical
properties of ultrafine-grained fcc/hcp cobalt processed by a bottom-up
approach, J. Alloys Compd. 489 (2010) 424-428.
115. G. Dirras, J.
Gubicza, S. Ramtani, H. Bui, T. Szilágyi: Microstructure and mechanical
characteristics of bulk polycrystalline Ni consolidated from blends of
powders with different particle size, Mater. Sci. Eng. A. 527 (2010) 1206–1214.
116. J. Gubicza, K. Máthis, Z. Hegedűs, G. Ribárik, A.
L. Tóth: Inhomogeneous evolution of microstructure in AZ91 Mg-alloy during high
temperature Equal-Channel Angular Pressing, J. Alloys Compd. 492 (2010) 166–172.
117. Q. H. Bui, G. Dirras, S. Ramtani, J. Gubicza: On
the strengthening behavior of ultrafine-grained nickel processed from
nanopowder, Mater. Sci. Eng. A. . 527 (2010) 3227-3235.
118. G. Dirras, H. Couque, J. Gubicza, A. Ouarem, T.
Chauveau, P. Jenei: Fine-grained nickel
deformed by direct impact at different velocities: microstructure and
mechanical properties, Mater. Sci. Eng. A. . 527 (2010) 4128-4135.
119. N. Q. Chinh, T. Csanádi,
J. Gubicza, T. G. Langdon: Plastic behavior of fcc metals over a wide range of
strain, Acta Mater.
58 (2010) 5015–5021.
120. J. Gubicza, S.V.
Dobatkin, E. Khosravi: Reduction of vacancy concentration during storage
of severely deformed Cu, Mater. Sci. Eng. A 527 (2010) 6102–6104.
121. J. Gubicza, N. Q.
Chinh, J. L. Lábár, Z. Hegedűs, T. G. Langdon: Unique features of
ultrafine-grained microstructures in materials having low stacking fault
energy, Mater. Sci. Forum 659 (2010) 171-176.
122. H. Couque, A. Ouarem, G. Dirras, J. Gubicza: Mechanical
properties and microstructurural evolutions at high strain rates of
electrodeposited nickel, Proc. 1st TMS-ABM International Materials Congress,
July 26-30, 2010, Rio de Janeiro, Brazil, ISSN 1516-392X, pp. 4282-4290.
123. J. Gubicza, J.
Lendvai: Formation of quasicrystals in bulk metallic glasses and their
effect on mechanical behavior, in the book entitled: Quasicrystals: Types,
Systems, and Techniques, Editor: Beth E. Puckermann, Nova Science
Publishers, Inc. Hauppauge, NY (2010), chapter 6, pp. 147-161 (ISBN:
978-1-61761-123-0).
124. J. Gubicza, N. Q. Chinh, T. G. Langdon: Monitoring of self-annealing in
ultrafine-grained silver by nanoindentation, Nanosci. Nanotechnol.
Lett. 2 (2010) 294-297.
125. J. Gubicza, N. Q. Chinh, S. V. Dobatkin, E. Khosravi, T. G. Langdon:
Stability of ultrafine-grained microstructure in fcc metals processed by
severe plastic deformation, Key Engineering Materials 465 (2011) 195-198.
126. J. Gubicza, E. Khosravi, V.V. Stolyarov: Microstructure and thermal
stability in CP titanium processed by electroplastic rolling, Key Engineering
Materials 465 (2011) 215-218.
127. J. Gubicza, S.V.
Dobatkin, E. Khosravi, A.A. Kuznetsov, J.L. Lábár: Microstructural stability of
Cu processed by different routes of severe plastic deformation, Mater. Sci. Eng. A 528
(2011) 1828–1832.
128. N.Q. Chinh, T. Csanádi, J.
Gubicza, R.Z. Valiev, B.B. Straumal, T.G. Langdon: The effect of grain-boundary
sliding and strain rate sensitivity on the ductility of ultrafine-grained
materials, Mater. Sci. Forum 667-669 (2011) 677-682.
129. K. Máthis, T. Krajnák, R.
Kuzel, J. Gubicza: Structure and mechanical behaviour of interstitial-free
steel processed by equal-channel angular pressing, J. Alloys Compd. 509 (2011) 3522–3525.
130. T. Csanádi, N. Q. Chinh,
J. Gubicza, T. G. Langdon: Plastic behavior of fcc metals over a wide range of
strain II: Macroscopic and microscopic descriptions and their relationship, Acta Mater. 59 (2011) 2385–2391.
131. S. G. Chowdhury, J.
Gubicza, B. Mahato, N. Q. Chinh, Z. Hegedűs, T. G. Langdon: Texture Evolution
during Room Temperature Ageing of Silver Processed by Equal-Channel Angular
Pressing, Scripta Mater. 64 (2011) 1007–1010.
132. P. Jenei, E.Y. Yoon, J.
Gubicza, H.S. Kim, J.L. Lábár, T. Ungár: Microstructure and hardness of copper
- carbon nanotube composites consolidated by High Pressure Torsion, Mater. Sci. Eng. A 528
(2011) 4690-4695.
133. G. Dirras, A. Ouarem, H.
Couque, J. Gubicza, P. Szommer, O. Brinza: Microstructure and nanohardness
distribution in a polycrystalline Zn deformed by high strain rate impact,
Mater. Charact. 62 (2011) 480-487.
134. G. Dirras, J. Gubicza, D.
Tingaud, S. Billard: Microstructure of Al-Al2O3 nanocomposite formed by in-situ
phase transformation during Al nanopowder consolidation, Materials Chemistry
and Physics 129 (2011) 846–852.
135. Z. Hegedűs, J. Gubicza,
M. Kawasaki, N.Q. Chinh, Zs. Fogarassy, T.G. Langdon: The effect of impurity
level on ultrafine-grained microstructures and their stability in low stacking
fault energy silver, Mater. Sci. Eng. A 528 (2011) 8694–8699.
136. A. Horváth, A. Beck, Gy.
Stefler, T. Benkó, Gy. Sáfrán, Zs. Varga, J. Gubicza, L. Guczi: Silica-supported
Au nanoparticles decorated by CeO2: Formation, morphology and CO oxidation
activity, J. Phys. Chem. C 115
(2011) 20388–20398.
137. G. Dirras, T. Chauveau,
A. Abdul-Latif, J. Gubicza, S. Ramtani, H.Q. Bui, B. Bacroix, Z. Hegedűs: Ultrafine-grained
aluminum processed by a combination of Hot Isostatic Pressing and Dynamic
Plastic Deformation: microstructure and mechanical properties, Metall. Trans. A 43 (2012)
1312-1322.
138. N.Q. Chinh, T. Győri, J.
Gubicza, J. Lendvai, T.G. Langdon: Possible self-organized criticality in the
Portevin - Le Chatelier effect during decomposition of solid solution alloys, MRS
Communications 2 (2012) 1-4.
139. J. Gubicza: Defect
structure in nanomaterials, (book) Publisher: Woodhead Publishing Ltd.,
Cambridge, UK, ISBN: 978-0-85709-206-9 (2012).
140. P. Jenei, J. Gubicza, E.Y.
Yoon, H.S. Kim: X-ray diffraction study on the microstructure of a Mg-Zn-Y
alloy consolidated by High-Pressure Torsion, J. Alloys Compd. 539 (2012)
32–35.
141. E.Y. Yoon, D.J. Lee, T-S.
Kim, H.J. Chae, P. Jenei, J. Gubicza, T. Ungár, M. Janecek, J. Vratna, S.H.
Lee, H.S. Kim: Microstructures and Mechanical Properties of Mg-Zn-Y Alloy
Consolidated from Gas-Atomized Powders Using High-Pressure Torsion, J. Mater.
Sci. 47 (2012) 7117–7123.
142. Z. Hegedűs, J. Gubicza,
M. Kawasaki, N.Q. Chinh, Zs. Fogarassy, T.G. Langdon: Microstructure of low
stacking fault energy silver processed by different routes of severe plastic
deformation, J. Alloys Compd. 536S (2012) S190– S193.
143. L. Farbaniec, A.
Abdul-Latif, J. Gubicza, G. Dirras: Ultrafine-grained nickel refined by
dislocation activities at intermediate strain rateimpact: deformation
microstructure and mechanical properties, J. Mater. Sci. 47 (2012) 7932–7938.
144. M. Janecek, J. Cízek, J.
Gubicza, J. Vrátná: Microstructure and defect structure evolution in MgAlZn
alloy processed by severe plastic deformation, J. Mater. Sci. (2012) 47 (2012) 7860–7869.
145. L. Farbaniec, A.
Abdul-Latif, J. Gubicza, G. Dirras: High purity ultrafine-grained nickel
processed by dynamic plastic deformation: microstructure and mechanical
properties, Adv. Eng. Mater. 14 (2012) 1027-1033.
146. T. Csanádi, N.Q. Chinh, J. Gubicza, T.G. Langdon: Macroscopic
and microscopic descriptions of the plastic deformation of fcc metals over a
wide range of strain and temperature, Acta Physica Polonica A 122 (2012)
630-633.
147. K. Bobor, Z. Hegedűs, J. Gubicza, I. Barkai, P.
Pekker, G. Krállics: Microstructure and mechanical properties of Al 7075 alloy
processed by differential speed rolling, Periodica Polytechnica - Mechanical
Engineering 56 (2012) 111-115.
148. Z. Hegedűs, J. Gubicza, M. Kawasaki, N.Q. Chinh,
Zs. Fogarassy, T.G. Langdon: The Influence of Impurity Content on Thermal
Stability of Low Stacking Fault Energy Silver Processed by Severe Plastic
Deformation, Mater. Sci. Forum 729
(2013) 222-227.
149. J. Gubicza, G. Dirras, S.
Ramtani: Effect of processing conditions on microstructure and mechanical
behavior of metals sintered from nanopowders, Mater. Sci. Forum 729 (2013) 49-54.
150. P. Jenei, E.Y. Yoon, J. Gubicza, H.S. Kim, J.L.
Lábár, T. Ungár: Microstructure and thermal stability of copper - carbon
nanotube composites consolidated by High Pressure Torsion, Mater. Sci. Forum 729 (2013) 228-233.
151. K. Sitarama Raju, V. Subramanya Sarma, A.
Kauffmann, Z. Hegedűs, J. Gubicza, M.
Peterlechner, J. Freudenberger, G. Wilde: High strength and ductile ultrafine
grained Cu-Ag alloy through bimodal grain size, dislocation density and solute
distribution, Acta Mater.
61 (2013) 228–238.
152. Z. Hegedűs, J. Gubicza, M. Kawasaki, N.Q. Chinh, K.
Süvegh, Zsolt Fogarassy, T.G. Langdon: High Temperature Thermal Stability of
Ultrafine-grained Silver Processed by Equal-Channel Angular Pressing, J. Mater. Sci. 48 (2013) 1675-1684.
153. G. Dirras, J. Gubicza, H. Couque, A. Ouarem, P.
Jenei: Mechanical behaviour and underlying deformation mechanisms in coarse-
and ultrafine-grained Zn over a wide range of strain rates, Mater. Sci. Eng. A 564 (2013) 273–283.
154. J. Gubicza, J.L. Lábár, L.M. Quynh, N.H. Nam, N.H.
Luong: Evolution of Size and Shape of Gold Nanoparticles during Long-time
Ageing, Mater. Chem. Phys. 138
(2013) 449-453.
155. Z. Hegedűs, J. Gubicza, M. Kawasaki, N.Q. Chinh, J.L.
Lábár, T.G. Langdon: Stability of the ultrafine-grained microstructure in
silver processed by ECAP and HPT, J. Mater. Sci. 48 (2013)
4637-4645.
156. P. Jenei, J. Gubicza, E.Y. Yoon, H.S. Kim, J.L.
Lábár: High temperature thermal stability of pure copper and copper - carbon
nanotube composites consolidated by High Pressure Torsion, Composites: Part A 51
(2013) 71–79.
157. Z. Hegedűs, J. Gubicza, P. Szommer, N.Q. Chinh, Y.
Huang, T.G. Langdon: Inhomogeneous softening during annealing of
ultrafine-grained silver processed by HPT, J. Mater. Sci. 48 (2013) 7384-7391.
158. P. Jenei, G. Dirras, J. Gubicza, H. Couque: Deformation
mechanisms in ultrafine-grained Zn at different strain rates and temperatures,
Key Engineering Materials, 592-593 (2014) 313-316.
159. P. Jenei, J. Gubicza, G. Dirras, J.L. Lábár, D.
Tingaud: Indentation creep study on ultrafine-grained Zn processed by powder
metallurgy, Mater. Sci. Eng. A 596 (2014) 170–175.
160. T. Csanádi, N. Q. Chinh,
J. Gubicza, Gy. Vörös, T. G. Langdon: Stress-strain
relationships in Al over a wide range of temperatures: characterization by macroscopic
and microscopic descriptions, Int. J. Plasticity 54 (2014) 178–192.
161. J. Gubicza: X-ray line profile analysis in Materials Science, (book) Publisher: IGI-Global, Hershey, PA,
USA, ISBN: 978-1-4666-5852-3 (2014).
162. G. Krállics, J. Gubicza, Z. Bezi, I. Barkai: Manufacturing
of ultrafine-grained titanium by caliber rolling in laboratory and industry, J.
Mater. Proc. Techn. 214 (2014)
1307–1315.
163. G. Dirras, D. Tingaud, G. Csiszár, J. Gubicza, H.
Couque, F. Mompiou: Characterization of bulk bimodal polycrystalline nickel
deformed by direct impact loadings, Mater. Sci. Eng. A 601 (2014) 48–57.
164. N. Oláh, M. Veres, A. Sulyok, M. Menyhárd, J.
Gubicza, K. Balázsi: Examination of nanocrystalline TiC/amorphous C deposited
thin films, J. Am. Ceram. Soc. 34 (2014) 3421-3425.
165. J. Gubicza, Z. Hegedűs, J.L. Lábár, V. Subramanya
Sarma, A. Kauffmann, J. Freudenberger: Microstructure evolution during
annealing of an SPD-processed supersaturated Cu – 3 at.% Ag alloy, Materials
Science and Engineering, IOP Conference Series 63 (2014)
012091.
166. T. Krajnák, K. Máthis, M. Janecek, J. Gubicza:
Comparison of the microstructure and the mechanical properties of AX41
magnesium alloy processed by EX-ECAP via three different routes A, Bc and C, Materials
Science and Engineering, IOP Conference Series 63 (2014)
012058.
167. M. Janecek, T. Krajnák, J. Stráská, J. Cízek, D.J.
Lee, H.S. Kim, J. Gubicza: Microstructure evolution in ultrafine-grained
interstitial free steel processed by high pressure torsion, Materials Science
and Engineering, IOP Conference Series 63 (2014)
012055.
168. O. Andreau, J. Gubicza, N.X. Zhang, Y. Huang, P.
Jenei, T.G. Langdon: Effect of short-term annealing on the microstructures and
flow properties of an Al-1% Mg alloy processed by high-pressure torsion, Mater.
Sci. Eng. A 615 (2014) 231-239.
169. D.V. Shangina, J. Gubicza, E. Dodony, N.R. Bochvar,
P.B. Straumal, N.Yu. Tabachkova, S.V. Dobatkin: Improvement of strength and
conductivity in Cu-alloys with the application of High Pressure Torsion and
subsequent heat-treatments, J. Mater.
Sci. 49 (2014) 6674-6681.
170. J. Gubicza, Z. Hegedűs, J.L. Lábár, A. Kauffmann,
J. Freudenberger, V. Subramanya Sarma: Solute redistribution during annealing
of a cold rolled Cu–Ag alloy, J. Alloys
Compd. 623 (2015) 96-103.
171. D. Tingaud, A. Krawczynska, F. Mompiou, P. Jenei, J.
Gubicza, G. Dirras: Investigation of deformation micro-mechanisms in nickel
consolidated from a bimodal powder by spark plasma sintering, Materials
Characterization 99 (2015) 118–127.
172. J. Stráská, M. Janecek, J Gubicza, T. Krajnák E.Y.
Yoon, H.S. Kim: Evolution of microstructure and hardness in AZ31 alloy
processed by high pressure torsion, Mater. Sci. Eng. A 625 (2015) 98–106.
173. J. Gubicza, K. Sitarama Raju, V. Subramanya Sarma,
A. Kauffmann, Z. Hegedűs, M. Peterlechner, J. Freudenberger, G. Wilde: The
effect of thermomechanical treatment on the microstructure and the mechanical
behavior of a supersaturated Cu-Ag alloy, Mater. Sci. Forum 812 (2015) 53-58.
174. M. Ujvári, J. Gubicza, V. Kondratiev, K.J. Szekeres, G.G. Láng: Morphological changes in
electrochemically deposited poly(3,4-ethylenedioxythiophene) films during
overoxidation, Journal of Solid State Electrochemistry 19 (2015) 1247-1252.
175. S.V. Dobatkin, J. Gubicza, D.V. Shangina, N.R.
Bochvar, N.U. Tabachkov: High strength and good electrical conductivity in
Cu-Cr alloys processed by severe plastic deformation, Materials Letters 153 (2015) 5-9.
176. K. Máthis, G. Csiszár, J. Capek, J. Gubicza, B.
Clausen, P. Lukás, A. Vinogradov, S. R. Agnew: Effect of the loading mode on
the evolution of the deformation mechanisms in randomly textured magnesium
polycrystals: comparison of experimental and modeling results, Int. J.
Plasticity 72 (2015) 127-150.
177. G. Dirras, J. Gubicza, A. Heczel, L. Lilenstein,
J.-P. Couzinié, L. Perrière, Y. Guillot, A. Hocini: Microstructural investigation of plastically deformed Ti20Zr20Hf20Nb20Ta20
high entropy alloy by X-ray diffraction and transmission electron microscopy, Materials Characterization 108
(2015) 1-7.
178. K. Máthis, J. Gubicza, G. Csiszár, J. Capek, B.
Clausen, V. Sima: Effect of loading mode on the evolution of the dislocation
structure in magnesium, Acta Physica Polonica A 128 (2015) 700-703.
179. J. Gubicza: Correlation between processing
conditions, lattice defect structure and mechanical performance of ultrafine-grained
materials, Acta Physica Polonica A 128 (2015) 479-486.
180. T. Krajnák, K. Máthis, J. Stráská, M. Janecek, J.
Gubicza: Microstructure and mechanical properties of severely deformed AX41
magnesium alloy, Acta Physica Polonica A 128 (2015) 768-771.
181. G. Krállics, J.
Gubicza, Z. Bezi: Production of ultrafine-grained titanium by industrial
caliber rolling, Proc. of ICANM 2015: International Conference &
Exhibition on Advanced & Nano Materials, August 10-12, 2015, Ottawa, Ontario,
Canada, Publisher: International Academy of Energy, Minerals and
Materials, Ottawa, Ontario, Canada, ISBN: 978-1-77136-384-6 (2015) pp.
211-221.
182.
Csanády Andrásné, Gábor János, Jenei
Péter, Gubicza
Jenő, Szabó Péter János, Fábián
Réka, Radnóczi György, Tóth Attila Lajos,
Langer Gábor, Krafcsik Olga, Verő Balázs: Ganz
Ábrahám vasúti kerekeinek titkai
anyagtudományi vizsgálatok tükrében,
Kohászat, 148 (2015) 37-43.
183. M. Ujvári, G. G. Láng, S. Vesztergom, K. J.
Szekeres, N. Kovács, J. Gubicza: Structural changes during the overoxidation of
electrochemically deposited poly(3,4-ethylenedioxythiophene) films, J.
Electrochem. Sci. Eng. 6 (2015)
77-89.
184. T. Berecz, P. Jenei,
A. Csóré, J. Lábár, J. Gubicza, P.J. Szabó: Determination of dislocation
density by electron backscatter diffraction and X-ray line profile
analysis in ferrous lath martensite, Materials Characterization 113 (2016) 117–124.
185. G. Dirras, H.
Couque, L. Lilensten, A. Heczel, D. Tingaud, J.-P. Couzinié, L. Perrière,
J. Gubicza, I. Guillot: Mechanical behavior and microstructureof Ti20Hf20Zr20Ta20Nb20
high entropy alloy loaded under quasi-static and dynamic compression
conditions, Materials
Characterization 111 (2016) 106–113.
186. J. Cízek, M. Janecek, T. Krajnák, J. Stráská, P.
Hruska, J. Gubicza, H.S. Kim: Structural characterization of ultrafine-grained
interstitial-free steel prepared by severe plastic deformation, Acta Mater. 105 (2016) 258-272.
187. T. Kolonits, P. Jenei, B.G Tóth, Z. Czigány, J.
Gubicza, L. Péter, I. Bakonyi: Characterization of defect structure in
electrodeposited nanocrystalline Ni films, J. Electrochem. Soc. 163 (2016) D107-D114.
188. J. Gubicza, M. El-Tahawy, Y. Huang, H. Choi, H.
Choe, J.L. Lábár, T.G. Langdon: Microstructure, phase composition and hardness
evolution in 316L stainless steel processed by high-pressure torsion, Mater.
Sci. Eng. A 657 (2016) 215-223.
189. J. Gubicza, L. Farbaniec, G. Csiszár, T. Sadat, H.
Couque, G. Dirras: Microstructure and strength of nickel subjected to large
plastic deformation at very high strain rate, Mater. Sci. Eng. A 662 (2016) 9-15.
190. P. Jenei, H. Choi, A. Tóth, H. Choe, J. Gubicza:
Mechanical behavior and microstructure of compressed Ti foams synthesized via
freeze casting, Journal of the Mechanical Behavior of Biomedical Materials 63 (2016) 407–416.
191. G. Krállics, Z. Bezi, P. Bereczki, J. Gubicza:
Modelling of warm caliber rolling of titanium rods, Proceedings of 10th
International Rolling Conference and 7th European Rolling Conference, June 6-9,
2016, Graz, Austria, pp. 621-630. ISBN: 978-3-200-04613-9 (2016).
192. G.G. Láng, M. Ujvári, S. Vesztergom, V. Kondratiev,
J. Gubicza, K.J. Szekeres: The Electrochemical Degradation of Poly(3,4-ethylenedioxythiophene)
Films Electrodeposited from Aqueous Solutions,Zeitschrift für Physikalische Chemie 230 (2016) 1281–1302.
193. N.Q. Chinh, P. Jenei, J. Gubicza, E.V. Bobruk, R.Z.
Valiev, T.G. Langdon: Influence of Zn content on the microstructure and
mechanical performance of ultrafine-grained Al-Zn alloys processed by
high-pressure torsion, Materials Letters 186
(2017) 334-337.
194. M. El-Tahawy, J. Gubicza, Y. Huang, H. Choi, H.
Choe, J.L. Lábár, T.G. Langdon: Evolution
of microstructure, phase composition and hardness in 316L stainless steel
processed by High-Pressure Torsion, Mater. Sci. Forum 879 (2017) 502-507.
195. A. Heczel, L. Lilensten, J. Bourgon, L. Perrière, J.P.
Couzinié, I. Guillot , G. Dirras, Y. Huang, T.G. Langdon, J. Gubicza: Influence
of High-Pressure Torsion on the microstructure and the hardness of a Ti-rich
High-Entropy Alloy, Mater. Sci. Forum 879
(2017) 732-737.
196. M. El-Tahawy, J. Gubicza, Y. Huang, H. Choi, H.
Choe, J.L. Lábár, T.G. Langdon: The
influence of plastic deformation on lattice defect structure and mechanical
properties of 316L austenitic stainless steel, Mater. Sci. Forum 885 (2017) 13-18.
197. A. Heczel, Y. Huang, T.G. Langdon, J. Gubicza: Investigation
of lattice defects in a plastically deformed high-entropy alloy, Mater. Sci.
Forum 885 (2017) 74-79.
198. Á. Csanády, J. Gábor, P. Jenei, J. Gubicza, P.J.
Szabó, R. Fábián, Gy. Radnóczi, A.L. Tóth, G. Langer, O. Krafcsik, B. Verő:
Secrets of Abraham Ganz’s train wheels enlightened by materials science methods,
Mater. Sci. Forum 885 (2017) 55-60.
199. M. El-Tahawy, Y. Huang, H. Choi, H. Choe, J.L.
Lábár, T.G. Langdon, J. Gubicza: High temperature thermal stability of
nanocrystalline microstructure in 316L stainless steel processed by
high-pressure torsion, Mater. Sci. Eng. A 682 (2017) 323-331.
200. M.K. Nezhad, M.H. Paydar, R. Ebrahimi, P. Jenei, P.
Nagy, J. Gubicza: Microstructure and mechanical properties of ultrafine-grained
aluminum consolidated by high-pressure torsion, Mater. Sci. Eng. A 682 (2017) 501–508.
201. T. Krajnák, P. Minárik, J. Gubicza, K. Máthis, R.
Kuzel, M. Janecek: Influence of equal channel angular pressing routes on
texture, microstructure and mechanical properties of extruded AX41 magnesium
alloy, Materials Characterization 123 (2017) 282–293.
202. K. Máthis, G. Farkas, G. Garcés, J. Gubicza: Loading
direction dependence of the dislocation density in a Mg-Zn-Y alloy with long
period stacking ordered structure, Materials Letters 190 (2017) 86-89.
203. G. Kapoor, Y. Huang, V. Subramanya Sarma, T.G.
Langdon, J. Gubicza: Effect of Mo addition on the microstructure and hardness
of ultrafine-grained Ni alloys processed by a combination of cryorolling and
high-pressure torsion, Mater. Sci. Eng. A 688 (2017) 92-100.
204. Z. Bezi, G. Krállics, M. El-Tahawy, P. Pekker, J.
Gubicza: Processing of ultrafine-grained titanium with high strength and good
ductility by a combination of multiple forging and rolling, Mater. Sci. Eng. A 688 (2017) 210–217.
205. T. Krajnák, P. Minárik, J. Stráska, J. Gubicza, K.
Máthis, R. Kuzel, M. Janecek: Influence of equal channel angular pressing
temperature on texture, microstructure and mechanical properties of extruded
AX41 magnesium, J. Alloys and Compounds 705 (2017)
273-282.
206. A. Heczel, M. Kawasaki, J.L. Lábár, J.-il Jang, T.G.
Langdon, J. Gubicza: Defect structure and hardness in nanocrystalline CoCrFeMnNi High-Entropy
Alloy processed by High-Pressure Torsion, J. Alloys
and Compounds 711 (2017) 143-154.
207. J. Gubicza: Defect Structure and Properties of
Nanomaterials, 2nd and Extended Edition, Woodhead Publishing, an imprint of Elsevier,
Duxford, UK, ISBN: 9780081019177 (2017).
208. H. Choi, S. Shilko, J. Gubicza, H. Choe: Study of
the solidification, compression, and wear-resistance properties of
ice-templated Ti and Ti‒5W alloy foams for biomedical applications, Journal of the Mechanical Behavior of
Biomedical Materials 72 (2017) 66–73.
209. N.H. Luong, T.T. Trung, T.P. Loan, N.H. Nam, P. Jenei,
J.L. Lábár, J Gubicza: Structure and magnetic properties of nanocrystalline
Fe55Pd45 processed by sonoelectrodeposition, J. Electronic Materials 46 (2017) 3720-3725..
210. G. Kapoor, Y. Huang, V. Subramanya Sarma, T.G. Langdon,
J. Gubicza: Evolution of the microstructure during annealing of
ultrafine-grained Ni with different Mo contents, 130 Mater. Charact.
(2017) 56-63.
211. J Gubicza: Practical Applications of X-Ray Line
Profile Analysis, in: Materials science and engineering: concepts,
methodologies, tools, and applications, editor: Information Resources
Management Association, IGI-Global,
Hershey, PA, USA, ISBN 9781522517993 (2017) Volume II, 1094-1132.
212. P. Minárik, T. Krajnák, O. Srba, J. Cizek, J.
Gubicza, M. Dopita, R. Kuzel, M. Janecek: Mechanical properties and
microstructure development in ultrafine-grained materials processed by
equal-channel angular pressing, chapter in the book entitled „Severe Plastic
Deformation Techniques”, InTech Publisher (2017) ISBN 978-953-51-3426-8, pp. 39-72.
213. C.N. Athreya , G. Kapoor, J. Gubicza, V. Subramanya
Sarma: Influence of mode of plastic straining on the microstructure of Ni and
Ti deformed through rolling and torsion, Materials Characterization 132 (2017) 205–214.
214. M. El-Tahawy, Y. Huang, H. Choi, H. Choe, J.L.
Lábár, T.G. Langdon, J. Gubicza: Stored energy in ultrafine-grained 316L
stainless steel processed by high-pressure torsion, J. Mater. Res. Techn. 6(4) (2017) 339-347.
215. G. Kapoor, Y. Huang, V. Subramanya Sarma, T.G. Langdon,
J. Gubicza: Influence of Mo alloying on the thermal stability and hardness of
ultrafine-grained Ni processed by high-pressure torsion, J. Mater. Res. Techn. 6(4) (2017) 361-368.
216. T. Kvackaj, A. Kovacova, R. Kocisko, J. Bidulska,
L. Lityńska–Dobrzyńska, P. Jenei, J. Gubicza, Microstructure evolution and
mechanical performance of copper processed by Equal Channel Angular Rolling, Materials
Characterization 134 (2017) 246-252.
217. M. El-Tahawy, P.H.R.
Pereira, Y. Huang, H. Park, H. Choe, T.G. Langdon, J. Gubicza: Exceptionally
high strength and good ductility in an ultrafine-grained 316L steel
processed by severe plastic deformation and subsequent annealing, Mater. Letters
214 (2018) 240-242.
218. G. Kapoor, L. Péter, É. Fekete, J. Gubicza: Defect
Structure in Electrodeposited Nanocrystalline Ni Layers with Different Mo
Concentrations, AIP Conference Proceedings 1953 (2018) 030047.
219. K Máthis, M El-Tahawy, G Garcés, J Gubicza: Evolution
of the dislocation structure during compression in a Mg-Zn-Y alloy with long
period stacking ordered structure, Magnesium Technology 2018, The Minerals, Metals
& Materials Series, Eds.: Dmytro Orlov,Vineet Joshi, Kiran N. Solanki, Neale
R. Neelameggham, The Minerals, Metals & Materials Society, ISBN 978-3-319-72331-0,
2018, pp. 385-390.
220. A. Heczel, M. Kawasaki, D. Ugi, J.-il Jang, T.G.
Langdon, J. Gubicza: The influence of chemical heterogeneities on the local
mechanical behavior of a high-entropy alloy: a micropillar compression study,
Mater. Sci. Eng. A 721 (2018) 165-167.
221. J. Gubicza, P. Jenei, K. Nam, Cs. Kádár, H. Jo, H.
Choe: Compressive behavior of Cu-Ni alloy foams: effects of grain size, porosity,
pore directionality and chemical composition, Mater. Sci. Eng. A 725 (2018) 160–170.
222. A. Heczel, F. Akbaripanah , M.A. Salavati, R.
Mahmudi, Á. Vida, J. Gubicza: A comparative study on the microstructural
evolution in AM60 alloy processed by ECAP and MDF, J. Alloys and Compounds 763 (2018) 629-637.
223. T. Kolonits, P.
Jenei, L. Péter, I. Bakonyi, Z. Czigány, J. Gubicza: Effect of bath
additives on the microstructure, lattice defect density and hardness of
electrodeposited nanocrystalline Ni films, Surf. Coat. Techn. 349 (2018) 611-621.
224. J. Gubicza, P.H.R.
Pereira, G. Kapoor, Y. Huang, V. Subramanya Sarma, T.G. Langdon: Annealing-induced
Hardening in Ultrafine-grained Ni-Mo Alloys, Adv. Eng. Mater. 20 (2018) 1800184.
225. J. Gubicza, R.
Németh, H. Park, K. Kim, J-H. Kim, M. Óvári, H. Choe: Lithiation-induced
microstructural evolution in cobalt foam electrode for lithium ion
batteries, Adv. Eng. Mater. 20 (2018) 1800343.
226. G. Kapoor, L. Péter, É. Fekete, J.L. Lábár, J.
Gubicza: The influence of Mo addition on the microstructure and its thermal
stability for electrodeposited Ni films, Materials Characterization 145 (2018) 563-572.
227. P. Jenei, C.
Balázsi, Á. Horváth, K. Balázsi, J. Gubicza: The influence of BN
additives on the phase composition, microstructure and mechanical
properties of 316L steel consolidated by spark plasma sintering, IOP Conf. Series: Materials Science and
Engineering 426 (2018) 012020.
228. M. El-Tahawy, K.
Máthis, G. Garcés, T. Matsumoto, M. Yamasaki, Y. Kawamura, J. Gubicza:
Type and density of dislocations in a plastically deformed long-period
stacking ordered Mg alloy, J. Alloys and Compounds 771 (2019) 629-635.
229. M. El-Tahawy, T. Um,
H-S. Nam, H. Choe, J. Gubicza: The effect of hydrogen charging on the
evolution of lattice defects and phase composition during tension in 316L
stainless steel, Mater. Sci. Eng. A 739
(2019) 31-36.
230. T. Krajnák, P.
Minárik, J. Stráská, J. Gubicza, K. Máthis, M. Janecek: Influence of as-cast and extruded
initial states on the evolution of microstructure and mechanical
properties of AX41 alloy processed by ECAP, J. Mater. Sci. 54 (2019) 3469-3484.
231. N.Q. Chinh, T.
Csanádi, J. Gubicza, R.Z. Valiev: Correlation between strain-rate
sensitivity and viscous properties derived from dynamic nanoindentation of
ultrafine-grained Al-Zn alloys, MRS Comm. 9 (2019) 310–314.
232. P. Jenei, C.
Balázsi, Á. Horváth, K. Balázsi, J. Gubicza: The influence of carbon
nanotube addition on the phase composition, microstructure and mechanical
properties of 316L stainless steel consolidated by spark plasma sintering, J. Mater. Res. Techn. 8 (2019) 1141-1149.
233. K. Nam, S. Lee, K.
Hong, J.S. Kang, H. Jo, H. Park, Y.-E. Sung, P. Jenei, J. Gubicza, K.
Kwon, H.-S. Nam, H. Choe, Freeze casting is a facile method to create
solid solution alloy foams: Cu-Ni alloy foams via freeze casting, Adv.
Eng. Mater. (2019) 1801265.
234. J. Gubicza, A.
Heczel, M. Kawasaki, J.-K. Han, Y. Zhao, Y. Xue, S. Huang, J.L. Lábár, Evolution
of microstructure and hardness in Hf25Nb25Ti25Zr25 high-entropy alloy
during high-pressure torsion, J. Alloys and Compounds 788 (2019) 318-328.
235. I. Bakonyi, V.I.
Isnanini, T. Kolonits, Zs. Czigány, J. Gubicza, L.K. Varga, E. Tóth-Kádár,
L. Pogány, L. Péter, H. Ebert: The specific grain-boundary electrical
resistivity of Ni, Phil. Mag. 99
(2019) 1139–1162.
236. G. Kapoor, L. Péter,
É. Fekete, J.L. Lábár, J. Gubicza: Stored energy in nanocrystalline Ni-Mo
films processed by electrodeposition, J. Alloys and Compounds 796 (2019) 307-313.
237. J. Gubicza, J.L.
Lábár, J. Lendvai, N.Q. Chinh: The influence of artificial aging on the
microstructure and hardness of an Al-Zn-Mg-Zr alloy processed by equal
channel angular pressing, J. Mater. Sci. 54 (2019) 10918–10928.
238. J. Gubicza: Lattice
defects and their influence on the mechanical properties of bulk materials
processed by severe plastic deformation, Materials Transactions 60 (2019) 1230-1242.
239. N.Q. Chinh, G. Rácz, J. Gubicza, R.Z. Valiev, T.G.
Langdon, A possible stabilizing effect of work hardening on the tensile
performance of superplastic materials, Mater. Sci. Eng. A 759 (2019) 448–454.
240. J. Gubicza, P.T. Hung, M. Kawasaki, J.-K. Han, Y.
Zhao, Y. Xue, J.L. Lábár, Influence of severe plastic deformation on the microstructure
and hardness of a CoCrFeNi high-entropy alloy: a comparison with CoCrFeNiMn, Materials
Characterization 154 (2019) 304-314.
241. L. Kocsor, L. Péter, G. Corradi, Zs. Kis, J. Gubicza,
L. Kovács: Mechanochemical reactions of lithium niobate induced by high-energy ball-milling,
Crystals 9 (2019) 334.
242. B. Omranpour, Y. Ivanisenko, R. Kulagin, L. Kommel,
E.G. Sanchez, D. Nugmanov, T. Scherera, A. Heczel, J. Gubicza, Evolution of
microstructure and hardness in aluminum processed by High Pressure Torsion
Extrusion, Mater. Sci. Eng. A 762 (2019) 138074.
243. T. Kolonits, Zs.
Czigány, L. Péter, I. Bakonyi, J. Gubicza: Influence of bath additives on
the thermal stability of the nanostructure and hardness of Ni films
processed by electrodeposition, Coatings 9 (2019) 644.
244. M. Kahnooji, A.
Zarei-Hanzaki, H.R. Abedi, M. Hassanpour-Esfahani, M.S. Jalali, J.
Gubicza, A. Heczel: An investigation into the dynamic recrystallization
behavior of a non-equiatomic high entropy alloy, Mater. Sci. Eng. A 768 (2019) 138423.
245.I. Bakonyi, D. Zalka, L. Peter, M. El-Tahawy, J. Gubicza, G. Molnár: Structure
and giant magnetoresistance of Co-Fe/Cu multilayer films electrodeposited from
various bath formulations, J. Electrochem. Soc. 166 (2019) D923-D934.
246. J. Gubicza: Annealing-induced hardening in
ultrafine-grained and nanocrystalline materials, Adv. Eng. Mater. 22 (2020) 1900507.
247. N.Q. Chinh, P. Szommer, J. Gubicza, M. El-Tahawy,
E.V. Bobruk, M. Yu, R.Z. Valiev: Characterizing Microstructural and Mechanical
Properties of Al-Zn Alloys processed by High-Pressure Torsion, Adv. Eng. Mater.
22 (2020) 1900672.
248. T. Krajnák, P.
Minárik, J. Stráská, J. Gubicza, L. Dluhos, K. Máthis, M. Janecek,
Influence of temperature of ECAP processing on the microstructure and
mechanical properties of as-cast AX41 alloy, J. Mater. Sci. 55 (2020) 3118–3129.
249. V.A. Isnaini, T.
Kolonits, Zs. Czigány, J. Gubicza, S. Zsurzsa, L.K. Varga, E. Tóth-Kádár,
L. Pogány, L. Péter: Room-temperature magnetoresistance of nanocrystalline
Ni metal with various grain sizes, The European Physical Journal Plus 135 (2020) article No. 39.
250. M.A. Salevati, F.
Akbaripanah, R. Mahmudi, K. H. Fekete, A. Heczel, J. Gubicza, Comparison
of the Effects of Isothermal Equal Channel Angular Pressing and Multi-Directional
Forging on Mechanical Properties of AM60 Magnesium Alloy, Mater. Sci. Eng.
A 776 (2020) 139002.
251. J. Gubicza, G.
Kapoor, D. Ugi, L. Péter, J.L. Lábár, Gy. Radnóczi: Micropillar
compression study on the deformation behavior of electrodeposited Ni-Mo
films, Coatings 10 (2020) 205.
252. P. Nagy, N. Rohbeck,
G. Roussely, P. Sortais, J. Gubicza, J. Michler, L. Pethő: Processing and
characterization of a multibeam sputtered nanocrystalline CoCrFeNi
high-entropy alloy film, Surface and Coatings Technology 386 (2020) 125465.
253. G. Kapoor, T. Kvackaj,
A. Heczel, J. Bidulska, R. Kocisko, Zs. Fogarassy, D. Simcak, J. Gubicza: The
influence of severe plastic deformation and subsequent annealing on the microstructure
and hardness of a Cu-Cr-Zr alloy, Materials 13 (2020) 2241.
254. P.T. Hung, M. Kawasaki, J.K. Han, J.L. Lábár, J.
Gubicza: Thermal stability of a nanocrystalline HfNbTiZr multi-principal
element alloy processed by high-pressure torsion, Materials Characterization 168 (2020) 110550.
255. P. Jenei, Cs. Kádár, G.
Han, P.T. Hung, H. Choe, J. Gubicza: Annealing-induced toughening of
a Cu nanofoam processed by dealloying, Metals 10 (2020) 1128.
256. M. El-Tahawy, P. Jenei, T. Kolonits, G. Han, H.
Park, H. Choe, J. Gubicza: Different evolutions of the microstructure, texture,
and mechanical performance during tension and compression of 316L stainless
steel, Metall. Mater. Trans. A 51 (2020)
3447-3460.
257. J. Gubicza, N.Q. Chinh: Deformation-softening in ultrafine-grained materials, IOP Conf. Ser.: Mater. Sci. Eng. 903
(2020) 012041.
258. P. Jenei, G. Han, P.T. Hung, H. Choe, J. Gubicza: Influence
of pack cementation time on the microstructure of Cu nanofoams processed by
dealloying, IOP Conf. Ser.: Mater. Sci. Eng.903 (2020) 01204.
259. J. Gubicza, M. El-Tahawy, J.L. Lábár, E.V. Bobruk,
M.Y. Murashkin4, R.Z. Valiev, N.Q. Chinh: Evolution of microstructure and
hardness during artificial aging of an ultrafine-grained Al-Zn-Mg-Zr alloy
processed by high pressure torsion, J. Mater. Sci. 55 (2020) 16791-16805.
260. Y. Huang, J. Millet, N.X. Zhang, P. Jenei, J. Gubicza, T.G. Langdon: An
investigation of strain softening phenomenon in Al-0.1% Mg alloy during
high-pressure torsion processing, Adv. Eng. Mater. (2020) 1901578.
261. T. Kolonits, Zs. Czigány, L. Péter, I. Bakonyi, J.
Gubicza: Improved hardness and thermal stability of nanocrystalline nickel
electrodeposited with the addition of cysteine, Nanomaterials 10 (2020) 2254.
262. Y. Song, J-S. Hwang, S. Lee, B. Thirumalraj, J-H.
Kim, P. Jenei, J. Gubicza, H. Choe: Synthesis of a High-Capacity NiO/Ni Foam
Anode for Advanced Lithium-Ion Batteries, Adv. Eng. Mater. (2020) 2000351.
263. M.K. Nezhad, M.H. Paydar, M.M.H. Shirazi, J.
Gubicza: Microstructure and Tensile Behavior of Al7075/Al Composites
Consolidated from Machining Chips Using HPT: A Way of Solid‑State Recycling,
Metals and Materials International 26
(2020) 1881-1898.
264. A.A. Khaleghi, F. Akbaripanah, M. Sabbaghian, K.
Máthis, P. Minárik, J. Veselý, M. El-Tahawy, J. Gubicza: Influence of
high-pressure torsion on microstructure, hardness and shear strength of AM60
magnesium alloy, Mater. Sci. Eng. A 799
(2021) 140158.
265. P.T. Hung, M. Kawasaki, J.K. Han, J.L. Lábár, J.
Gubicza: Microstructure evolution in a nanocrystalline CoCrFeNi multi-principal
element alloy during annealing, Materials Characterization 171 (2021) 110807.
266. T. Krajnák, M. Janecek, P. Minárik, J. Gubicza,
P.T. Hung, F. Novy, A.G. Raab, G.I. Raab, R. Asfandiyarov: Microstructure evolution in Cu – 0.5 wt% Zr alloy
processed by a novel severe plastic deformation technique of rotational
constrained bending, Metals 11
(2021) 63.
267. T. Krajnák, M. Janecek, P. Minárik, J. Vesely, P.
Cejpek, J. Gubicza, P.T. Hung, D. Preisler, F. Novy, A.G. Raab, G.I. Raab, R.
Asfandiyarov: Microstructure evolution and mechanical properties of cp-Ti
processed by a novel technique of rotational constrained bending, Metall.
Mater. Trans. A 52 (2021) 1665-1678.
268. L. Péter, É. Fekete, G. Kapoor, J. Gubicza,
Influence of the preparation conditions on the microstructure of electrodeposited
nanocrystalline Ni–Mo alloys, Electrochimica Acta 382 (2021) 138352.
269. J. Gubicza, P. Jenei, G. Han, P.T. Hung, Y. Song,
D. Park, Á. Szabó, Cs. Kádár, J-H. Kim, H. Choe, Effect of heat treatment on
the microstructure and performance of Cu nanofoams processed by dealloying: an
overview, Materials 14 (2021) 2691.
270. N. Fakhar, M. Sabbaghian, P. Nagy, K. Fekete, J.
Gubicza: Superior low-temperature superplasticity in fine-grained ZK60 Mg alloy
sheet produced by a combination of repeated upsetting process and extrusion,
Mater. Sci. Eng. A 819 (2021) 141444.
271. P. Nagy, N. Rohbeck, Z. Hegedűs, J. Michler, L.
Pethö, J.L. Lábár, J. Gubicza, Microstructure, hardness and elastic modulus of
a multibeam sputtered nanocrystalline Co-Cr-Fe-Ni compositional complex alloy
film, Materials 14 (2021) 3357.
272. A.K. Chandan, P.T. Hung, K. Kishore, M. Kawasaki,
J. Chakraborty, J. Gubicza: On prominent TRIP effect and non-basal slip in a
TWIP high entropy alloy during high-pressure torsion processing, Materials
Characterization 178 (2021) 111284.
273. F. Akbaripanah, M. Sabbaghian, N. Fakhar, P.
Minárik, J. Veselý, P. T. Hung, G. Kapoor, O. Renk, K. Máthis, J. Gubicza and
J. Eckert, Influence of high pressure torsion on microstructure evolution and
mechanical properties of AZ80/SiC magnesium matrix composites, Mater. Sci. Eng.
A 826 (2021) 141916.
274. N.Q. Chinh, M.Yu. Murashkin, E.V. Bobruk, J.L. Lábár,
J. Gubicza, Zs. Kovács, A. Qasim, V. Maier-Kiener, R.Z. Valiev, Phenomenon of
low-temperature superplasticity and its mechanisms in commercial Al alloys,
Mater. Res. Lett. 9 (2021) 475-482.
275. M. Sabbaghian, N. Fakhar, P. Nagy, K. Fekete, J.
Gubicza, Correlation between microstructure and texture evolution and shear and
tensile properties of ZK60 Mg alloy fabricated by rolling and sheet extrusion,
Mater. Sci. Eng. A 828 (2021) 142098.
276. Cs. Kádár, H. Park, P. Jenei, M-Y. Kim, Á. Szabó,
H. Choe, J. Gubicza, Investigating the compressive behaviors of Cu foams
processed by freeze casting by using acoustic emissions, Adv. Eng. Mater. (2021)
2100378.
277. J.J. Sidor, P. Chakravarty, J.Gy. Bátorfi, P. Nagy,
Q. Xie, J. Gubicza, Assessment of dislocation density by various techniques in
2 cold rolled 1050 Aluminum Alloy, Metals 11
(2021) 1571.
278. K. Hong, Cs. Kádár, M. Knapek, D. Drozdenko, P.
Jenei, M-Y. Kim, H. Choe, K. Máthis, H. Park, J. Gubicza, Comparison of
morphology and compressive deformation behavior of copper foams manufactured
via freeze-casting and space-holder methods, Journal of Materials Research and
Technology 15 (2021) 6855-6865.
279. J. Gubicza, Comment on “Influence of prior
deformation temperature on strain induced martensite formation and its effect
on the tensile strengthening behaviour of type 304 SS studied by XRDLPA.
Materials Science & Engineering A 826 (2021) 141960”, Mater. Sci. Eng. A 832 (2022) 142450.
280. P.T. Hung, M. Kawasaki, J.K. Han, Á. Szabó, J.L.
Lábár, Z. Hegedűs, J. Gubicza: Thermal stability of nanocrystalline CoCrFeNi
multi-principal element alloy: effect of the degree of severe plastic
deformation, Intermetallics 142
(2022) 107445.
281. M. Ghosh, S.G. Chowdhury, M. Kawasaki, J. Gubicza, Effect of nickel addition
on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10
high entropy alloy during high-pressure torsion, Int. J. Plasticity 150
(2022) 103193.
282. B.O. Shahreza, M.A.L. Hernandez-Rodriguez, E. Garcia-Sanchez, L. Kommel,
F. Sergejev, A. Salinas-Rodríguez, A. Heczel, J. Gubicza, The impact of microstructural refinement on the tribological
behavior of niobium processed by Indirect Extrusion Angular Pressing, Tribology International 167
(2022) 107412.
283. A. Hattal, K. Mukhtarova, M. Djemai, T. Chauveau, A.
Hocini, J.J. Fouchet, B. Bacroix, J. Gubicza, G. Dirras, The effect of hot
isostatic pressing post-treatment on microstructure and mechanical properties
of Laser Powder Bed Fusion fabricated Ti6Al4V and Ti6Al4V reinforced with nano
yttria-stabilized zirconia, Materials and Design 214 (2022) 110392.
284. K. Kishore, A.K. Chandan, P.T. Hung, S. Kumar, M.
Kawasaki, J. Gubicza, On the enhanced hardening ability and plasticity
mechanisms in a novel Mn-added CoCrNi medium entropy alloy during high-pressure
torsion, J. Alloys and Compounds (2022) 904 (2022) 163941.
285. K. Edalati, A.
Bachmaier, V. Beloshenko, Y. Beygelzimer, V.D. Blank, W.J. Botta, K. Bryła, J.
Čízěk, S. Divinski, N.A. Enikeev, Y. Estrin, G. Faraji, R.B. Figueiredo, M.
Fuji, T. Furuta, T. Grosdidier, J. Gubicza, A. Hohenwarter, Z. Horita, J. Huot,
Y. Ikoma, M. Janeček, P. Krǎl, M. Kawasaki, S. Kuramoto, T.G. Langdon, D.R.
Leiva, V.I. Levitas, A. Mazilkin, M. Mito, H. Miyamoto, T. Nishizaki, R.
Pippan, V.V. Popov, E.N. Popova, G. Purcek, O. Renk, Á. Révész, X. Sauvage, H.
Sena, V. Sklenicka, W. Skrotzki, B.B. Straumal, S. Suwas, L.S. Toth, N. Tsuji,
R.Z. Valiev, G. Wilde, M.J. Zehetbauer, X. Zhu, Nanomaterials by Severe Plastic
Deformation: Review of Historical Developments and Recent Advance, Materials Research
Letters 10 (2022), 163-256.
286. C.M. Roper, A. Heczel, V.S. Bhattiprolu, T.
Kolonits, J. Gubicza, L.N. Brewer, Effect of Laser Heating on Microstructure
and Deposition Properties of Cold Sprayed SS304L, Materialia 22 (2022) 101372.
287. P. Nagy, N. Rohbeck, R. Widmer, Z. Hegedűs, J.
Michler, L. Pethö, J.L. Lábár, J. Gubicza, Combinatorial Study of Phase Composition, Microstructure and Mechanical
Behavior of Co-Cr-Fe-Ni Nanocrystalline Film Processed by
Multiple-Beam-Sputtering Physical Vapor Deposition, Materials 15 (2022) 2319.
288. M. El-Tahawy, L. Péter, L.F. Kiss, J. Gubicza, Zs.
Czigány, G. Molnár, I. Bakonyi, Anisotropic magnetoresistance (AMR) of cobalt: hcp-Co
vs. fcc-Co, J. Magn. Magn. Mater. 560
(2022) 169660.
289. B. Guennec, A. Hattal, A. Hocini, K. Mukhtarova, T.
Kinoshita, N. Horikawa, J. Gubicza, M. Djemaï, G. Dirras, Fatigue performance
of zirconia-reinforced Ti-6Al-4V nanocomposite processed by laser powder bed
fusion: an improvement by hot isostatic pressing, Int. J. Fatigue 164 (2022) 107129.
290. P. Seifollahzadeh, M. Alizadeh, Á. Szabó, J.
Gubicza, M. El-Tahawy, Microstructure and mechanical performance of Cu-Al-Ag
alloys manufactured by accumulative roll bonding: effect of Ag content and
post-processing heat treatment, Crystals 12
(2022) 1167.
291. P. Jenei, Cs. Kádár, Á. Szabó, S.M. Hung, C.J. Kuo,
H. Choe, J. Gubicza, Mechanical behavior of freeze-cast Ti foams with varied
porosity, Mater. Sci. Eng. A 855 (2022)
143911.
292. P.T. Hung, M. Kawasaki, Á. Szabó, J.L. Lábár, Z.
Hegedűs, J. Gubicza, Influence
of degree of severe plastic deformation on thermal stability of an HfNbTiZr
multi-principal element alloy processed by high pressure torsion, Nanomaterials 12 (2022) 3371.
293. N.H. Luong, T.T. Trung, T.T. Hong, N.H. Nam, M.H.
Phan, P. Jenei, J.L. Lábár, J. Gubicza, Relating the magnetic coercivity to the
ordered L10 FePd phase in annealed FexPd100-x
nanoparticles, Applied Physics A –
Materials Science and Processing 128 (2022)
936.
294. S. Zsurzsa, M. El-Tahawy,
L. Péter, L.F. Kiss, J. Gubicza, G. Molnár, I. Bakonyi, Spacer layer thickness
dependence of the giant magnetoresistance in electrodeposited Ni-Co/Cu
multilayers, Nanomaterials 12
(2022) 4276.
295. P. Nagy, B. Kaszás, I.
Csabai, Z. Hegedűs, J. Michler, L. Pethö, J. Gubicza, Machine learning-based
characterization of the nanostructure in a combinatorial Co-Cr-Fe-Ni
compositionally complex alloy film, Nanomaterials
12 (2022) 4407.
296. J. Gubicza, Reliability and
interpretation of the microstructural parameters determined by X-ray line
profile analysis for nanostructured materials, Eur. Phys. J. Spec. Top. 231 (2022):4153–4165.
297. N. Fakhar, E. Khademi, M.
Sabbaghian, A. Momeni, F. Fereshteh-Saniee, P. Nagy, Á. Szabó, J. Gubicza,
Microstructure and hot shear deformation behavior of a fine-grained AA5083 aluminum
alloy, Materials Chemistry and Physics 294
(2023) 126976.
298. B.O. Shahreza, J. Huot, M.
Antonov, L. Kommel, F. Sergejev, F.J.P. Trujillo, A. Heczel, J. Gubicza, Microstructural features and tribological behavior
of tantalum processed by Indirect Extrusion Angular Pressing, International Journal of Refractory Metals and Hard Materials 111
(2023) 106079.
299. S. Najafi, A. Sheikhani, M.
Sabbaghian, P. Nagy, K. Fekete, J. Gubicza, Modification of the tensile
performance of an extruded ZK60 magnesium alloy with the addition of rare earth
elements, Materials 16 (2023) 2828.
300. S. Najafi, M. Sabbaghian,
A. Sheikhani, P. Nagy, K. Fekete, J. Gubicza, Effect of addition of rare earth
elements on the microstructure, texture, and mechanical properties of extruded
ZK60 alloy, Metals Mater. Int. 29 (2023)
1699–1711.
301. J. Gubicza, P.T. Hung,
Nanostructuring of multi-principal element alloys by severe plastic
deformation: from fundamentals to an improved functionality, Mater. Trans. 64 (2023) 1284-1298.
302. P. Nagy, L. Péter, Zs.
Czigány, N.Q. Chinh, J. Gubicza, Processing and characterization of an
electrodeposited nanocrystalline Co–Fe–Ni–Zn multi-principal element alloy film,
Surf. Coat. Techn. 467 (2023) 129740.
303.M. El-Tahawy, L. Péter, J.
Gubicza, G. Molnár, C. Li, L. Vitos, I. Bakonyi, Metastable phase formation and
anisotropic magnetoresistance of electrodeposited Co-rich Co-Cu and Co-Ni
alloys, Journal of The Electrochemical Society 170 (2023) 062507.
304. K. Kishore, A.K. Chandan,
P.T. Hung, S. Kumar, M. Kawasaki, J. Gubicza, Effect of Si on the evolution of plasticity
mechanisms, grain refinement and hardness during high-pressure torsion of a
non-equiatomic CoCrMnNi multi-principal element alloy, Int. J. Plasticity 169 (2023) 103720.
305. G. Han, Y. Song, B.
Thirumalraj, M. Beak, Cs. Kádár, J Gubicza, H.S. Nam, K. Kwon, H. Choe, Superior
Capacity in Electric Double-Layer Capacitors Employing Three-Dimensional
Titanium Foam Electrodes, Metall. Mater. Trans. A 54 (2023) 3620–3629.
306. B. Fer, D. Tingaud, J. Gubicza,
N.Q. Chinh, Y. Hao, F. Cazes, F. Prima, G. Dirras, Microstructure evolution and
deformation mechanisms during compression of a harmonic–structured
Ti-24Nb-4Zr-8Sn alloy, J. Mater. Res. Techn. 26 (2023) 1260-1275.
307. I. Bakonyi, F.D. Czeschka,
V.A. Isnaini, A.T. Krupp, J. Gubicza, L.K. Varga, L. Péter, High-field
magnetoresistance measurements on Ni75Co25 and Ni40Co60 alloys at 3 K and 300 K,
J. Magn. Magn. Mater. 591 (2024)
171683.
308. J. Gubicza, K. Mukhtarova, M. Kawasaki, Nanostructuring
of additively manufactured 316L stainless steel using high pressure torsion
technique: an X-ray line profile analysis study, Materials 17 (2024) 454.
309. P. Nagy, B. Kaszás, I.
Csabai, Z. Hegedűs, J. Michler, L. Pethö, J. Gubicza, Combinatorial Design of
New High-entropy Alloys and Their Characterisation by a Novel Machine
Learning-based X-ray Line Profile Analysis, Proceedings of The 4th
International Workshop on Advanced Materials and Devices, August 10-13, 2023,
Thai Nguyen, Vietnam, (2023) accepted.
310. J. Gubicza, M. Kawasaki, Z.
Dankházi, M. Windisch, M. El-Tahawy, X-ray line profile analysis study on the
evolution of the microstructure in additively manufactured 316L steel during
severe plastic deformation, J. Mater. Sci. (2024) accepted.
311. F. Lofaj, M. Kabátová, L.
Kvetková, M. Lisnichuk, D. Albov, P. Jenei, J. Gubicza, Structure, mechanical
and tribological properties of Ta-xN coatings deposited by reactive HiTUS, Journal
of the European Ceramic Society (2024) accepted.
312. J. Gubicza, Combinatorial
design of novel multi-principal element alloys using experimental techniques, Adv.
Eng. Mater. (2024) 2301673.
313. K. Pratama, C. Tian, A.
Sharma, M. Watroba, J. Gubicza, B. Dilasari, J. Schwiedrzik, J. Michler, Tailoring
single- and dual-phase layered structures in supersaturated solid solution
nanocrystalline Co-Cu alloys via pulsed electrodeposition for the development
of high-strength complex micro-components, Surf. Coat. Techn. 480
(2024) 130613.
314. B. Guennec, A. Hattal, K.
Nagano, A. Hocini, K. Mukhtarova, T. Kinoshita, N. Horikawa, H. Fujiwara, J.
Gubicza, M. Djemai, G. Dirras, Failure mechanisms data analysis during tension
of additively manufactured Ti-6Al-4V alloy reinforced with nano-zirconia
particles: Investigations of the crack path, Data in Brief 54 (2024) 110283.